BGS technic 3269 User Manual

SW-Stahl und Werkzeugvertriebs GmbH Tel. +49 (0) 2191 / 46438-0
F 56 essartS resukreveL ax +49 (0) 2191 / 46438-40
ed.lhatsws@ofni :liaM-E diehcsmeR 79824-D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
OPERATION INSTRUCTIONS
1. Lubricate the tool before operating. See ·CARE AND
MAINTENANCE" section for oiling instructions.
2. Remove the collet fixing cap at counterclockwise direction
by hand or by one wrench while holding the other wrench
on the flats of the collet base.
3. Insert a grinding accessory like a grinding stone into the
collet hole.
4. Re-install the collet fixing cap at clockwise direction by one
wrench while holding the other wrench on the flats of the
collet base. Make sure the collet fixing cap is securely
tightened. Only use grinding accessories that have an
RPM rating equal to or greater than the tool itself.

BGS technic 3269 Specifications

General

Brand	BGS technic
Model	3269
Category	Grinder
Language	English