Need help?Do you have a question about the BGW 620 and is the answer not in the manual?
Read before operating. Ensure proper connections and avoid internal tampering.
Basic, high-power stereo amplifier for professional use. Simple operation and economy.
Location of controls, indicators, and connectors on front/rear panels.
Details on power output, THD, frequency response, and distortion.
Specs for signal response, hum, noise, damping factor, and offset voltage.
Instructions for saving the container and inspecting for transit damage.
Guidelines for proper mounting and airflow to prevent overheating.
Details on using 1/4" phone jacks and barrier strip inputs.
Proper phasing and connection of speakers to amplifier outputs.
Fuse selection for speaker protection and wire size impact on damping.
Introduction to constant voltage distribution systems and their principles.
How transformers are used to connect speakers in distribution systems.
Formulas for calculating system impedance and amplifier power requirements.
Information on connecting to the correct mains voltage and plug types.
Key warnings and advice for safe and correct operation.
Description of the power supply section and input signal path.
Details on the amplifier's main signal processing and gain stages.
Explanation of clipping indicators and output transformer functions.
Detailed circuit diagram for the heat sink module.
Diagram illustrating the overall chassis wiring.
List of capacitors and diodes used in the unit.
List of LEDs, ICs, jacks, plugs, and transistors.
Detailed list of resistors with values and specifications.
List of switches, transformers, barrier strips, and hardware.
List of chassis, mechanical parts, nuts, bolts, and washers.
Instructions for changing the unit's mains voltage configuration.
Form for requesting service or reporting unit problems.
Form to register the unit for warranty purposes.
To Next Page
General