BHM Medical V3 - User Manual

Questions and Answers

M
Mark YoungAug 4, 2025
What to do if BHM Medical V3 Lifting Systems lift doesn't work when pressing handset buttons?
- D
  daniellehayesAug 4, 2025
  If your BHM Medical Lifting Systems lift isn't responding to the handset, first ensure the emergency stop is not activated by gently releasing the emergency button. Check if the buttons on the lift itself are working. If they are, the issue may be with the handset. Also, verify the handset is properly plugged into the lift. If the lift still won't operate, contact your BHM Medical representative.
S
Steven OrtizAug 11, 2025
Why does my BHM Medical V3 unit start and stop repetitively?
- K
  Kenneth GarciaAug 11, 2025
  Your BHM Medical Lifting Systems unit might start and stop repetitively because the load is greater than the unit’s safe working load, triggering an overload protection on the motor that prevents it from functioning. Alternatively, the batteries may be low; in this case, change the batteries and contact your local BHM Medical representative.
B
bookerdarrenAug 18, 2025
What to do if BHM Medical V3 lift beeps during use?
- W
  willisterriAug 18, 2025
  If your BHM Medical Lifting Systems lift beeps during use and stops lifting but can still lower the patient, it likely indicates that the batteries are low. You should recharge the batteries.
D
daniellewoodAug 27, 2025
How to fix BHM Medical Lifting Systems charger indicator not lighting up?
- K
  Kristin LuceroAug 27, 2025
  If the yellow charger indicator on your BHM Medical Lifting Systems lift doesn't light up when connected, check that the charger is plugged into a standard electrical outlet and that the outlet has power. The green indicator light confirms the functionality of the charger.