EasyManua.ls Logo

Bialetti BREAK AUTOMATIC - 5. First Use of the Appliance; Initial Setup and Priming

Bialetti BREAK AUTOMATIC
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
42
By keeping the lever (1) lowered, place a coffee cup on the apposite cup
rack (8) and press the Long coffee button (11) to start dispensing water.
Repeat the cycle at least 3 times.
5. First use
of the appliance
2
With the machine unplugged,
take the tank (4) out and ll it
with drinking water up to the
MAX level.
Insert the power cord (5) of the
appliance in the socket as per
instructions of Warnings section.
3
4
Switch on the machine using the
on/off button (6) on the bottom
back.
During boiler heating, both lights
of the dispensing buttons (3)
blink. Once the light turns steady,
the machine is ready to deliver
coffee.
1
NEVER USE THE APPLIANCE IF THE TANK IS EMPTY.

Related product manuals