EN
43
6. Coffee making
5
6
Before dispensing, check water
level in the tank (4). Press the on/
off button (6) and make sure the
lights of the dispensing buttons (3)
are steady, then lift the lever (1).
Insert the capsule in the special
compartment (2), and then close
the lever (1), taking care not to
crush your hands.
IF THE CAPSULE IS MISSHAPEN, BEND THE EDGES BACK
INTO SHAPE.
NEVER PLACE FINGERS BETWEEN THE
MECHANISMS OR INSIDE THE CAPSULE
COMPARTMENT.
Place a cup onto the rack (8).
Start the required dispensing of
coffee, according to the following
procedures.
7
To Next Page
Loading...
