EN
38
6. Coffee making
5
6
Before dispensing, check water
level in the tank (4) and make
sure the button (8) is green, then
lift the lever (1).
Insert the capsule in the special
compartment (3), and then close
the lever (1), taking care not to
crush your hands.
IF THE CAPSULE IS MISSHAPEN, BEND
THE EDGES BACK INTO SHAPE.
NEVER PLACE FINGERS BETWEEN THE
MECHANISMS OR INSIDE THE CAPSULE
COMPARTMENT.
Place a cup onto the rack (5).
Start dispensing coffee by press-
ing the pour button (8).
When coffee reaches the required
level in the cup, stop dispensing
by pressing the button again.
For every following coffee, raise
the lever (1) to insert a new
capsule.
The system automatically ejects
the capsule previously used when
lifting the lever.
7
To Next Page
Loading...
