Bialetti SLW05 - Troubleshooting: Problems, Causes, and Solutions

EN
38
8. Problems/causes/solutions
Problem found Possible cause Solution
The appliance does not
turn on.
Plug not inserted.
Check proper inser-
tion of the plug or in-
sert it into a dierent
power socket.
The voltage required
for the appliance
does not correspond
to the available mains
voltage.
Check the mains
voltage with the
values required for the
appliance.
Possible internal
damage.
Contact the Customer
service Bialetti.
The bowl (3) is locked,
cannot be removed
from the motor unit.
The bowl was filled
with too much food
or the inserted sub-
stance is not suitable
for the features set
forth in this manual.
Press the switch (13)
on position “R” for
3-5 seconds twice or
three times.
The hopper (1) is
jammed.
The hopper was filled
with too much food
or the inserted sub-
stance is not suitable
for the features set
forth in this manual.
Press the switch (13)
on position “R” for
3-5 seconds twice or
three times.
Use the presser (2).
The motor is blocked.
The bowl was filled
with too much food
or the inserted sub-
stance is not suitable
for the features set
forth in this manual.
Press the switch (13)
on position “R” for
3-5 seconds twice or
three times.
The safety system
started owing to a
motor overheating.
After each use, dis-
connect the plug from
the mains outlet, emp-
ty the hopper and the
bowl and allow the
motor to cool down.