Bialetti SLW05 - Page 39

EN
39
8. Problems/causes/solutions
Problem found Possible cause Solution
Leakages from the bowl
base.
Components not
mounted properly.
Make sure the com-
ponents are mounted
properly.
The rubber tab under-
neath the bowl (Fig.
G) was not mounted
properly.
Inset the tab correct-
ly, as shown in this
manual.
Noise during the
squeezing phase.
Possible friction be-
tween the bowl and
the squeezing screw.
That is normal.
Make sure the food is
inserted properly into
the bowl.
The appliance vibrates
whilst in operation.
That is normal during
use.
The vibration is
normal during the
appliance operation,
anyway it is necessary
to contact the Bialetti
customer service in
the event of excessive
vibration.