Need help?Do you have a question about the Biasi RIVA PLUS HE 24C ERP and is the answer not in the manual?
Directs users to detailed technical specifications for boiler models.
Procedure for safely igniting the boiler and the role of operation lights.
Recommends annual servicing and lists key components to inspect/clean.
Troubleshooting common issues like lockout signals and pressure loss.
Pressure head vs. flow rate for the central heating system.
Detailed technical specifications for the 24C ERP model.
Detailed technical specifications for the 28C ERP model.
Requirements and spacing for satisfactory flue termination according to standards.
Requirements for condensate pipe, material, and connections.
Requirements for earthing, fused spur isolation, and mains supply connection.
Essential prescriptions for installation, including wall fixing and clearances.
Precautions for mounting the boiler bracket, considering flue and wall type.
Flue system assembly, sloping, and ensuring correct clearances.
Instructions for accessing the terminal block and making electrical connections.
Filling the central heating system, including flushing and pressure checks.
Procedures for checking and adjusting maximum/minimum gas pressures for efficiency.
Checking burner ignition uniformity and addressing potential issues.
Checks for pump operation, release, and troubleshooting if the pump fails.
Handing over manuals, explaining operation, controls, and maintenance advice.
Steps for converting the boiler to different gas types, including burner replacement.
Maintenance by qualified engineer; isolate power and gas.
To Next Page
General