Please note
:
solar panel cable should be purchased separately.
The package does not include solar panel cable.
① . Choose suitable solar panel(DC5521 charging cable 12~24V
/ Max. (100W) )
② . Put the solar panel under strong sunshine, face to the sun
perpendicularly.
③ . Take the cable, connect the solar panel and the product.
④ . When the product is charged fully by the Sun, it will stop
charging automatically. Please take out the charging cable,
and turn off our product.
Note
: Please make sure the cable connecting is correct and
stable, or will cause the connector in high temperature status or
sparking.
Note
: Please charge the product under 32-113
℉
temperature
environment.
Note
: During the charging, it is normal if the product is getting a
little bit hot.
Note
: The charging time is dierent when light intensity is
dierent.
Note
: If you choose the solar panel which is with MC4 connec-
tor, please make sure the positive and negative poles of solar panels
are connected correctly. Refer to the following connection chart.
10
To Next Page
Loading...