EasyManua.ls Logo

Bibene CN505 - Page 11

Bibene CN505
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
① . Connect the product and socket with the AC charger in the
package.
② . Please unplug the charger when charging completed.(it takes
about 7-8hrs to fully recharge the product if using 19V/4.75A
90W AC adapter charger).
③ . Please use original adaptor, non-standard adapters may cause
defects in the product.
Note
: It is normal for this product to get hot during charging.
Note
: Make sure that the wiring is in good contact, otherwise
the contact terminals may melt or ignite at high temperatures.
(2).Car Charger Charge the Product
① . Connect the product and the cigarette lighter socket
with the cigarette lighter cable in package.
② . Charge the product after starting the car.
Note
:
Make sure that the wiring is in good contact, otherwise
the contact terminals may melt or ignite at high temperatures.
Note
:
If the car battery is 12V, the product cannot be fully
charged. If the car battery is 24V, the product can be fully
charged.
(3).Solar Panel Charge the Product
9