once 1,5 litres has been
drained.
n. Your installation is now
complete and your BIBO bar
will be ready to be used and
enjoyed (Image vi).
When first used, the hot
tank will take approximately
5 minutes to get up to the
maximum temperature.
l. Similarly, fill the cold water
tank by dispensing water from
the cold water outlet (Image v).
To do this, touch and wait
until water starts dispensing.
Then touch any button to stop
the water flow.
m. It is recommended that you
drain 1,5 litres from the cold
tank and 1,5 litres from the
hot tank before drinking from
your BIBO bar. This is done by
simply dispensing water as
per the instructions on page 20
for chilled and boiling hot
water. Note: The BIBO bar will
automatically stop dispensing
Installing your BIBO bar
STEP BY STEP GUIDE FOR SELF-INSTALLATION
3. SETTING UP YOUR BIBO bar CONTINUED
v
vi
To Next Page
Loading...