Using your BIBO bar
DISPENSING WATER
DISPENSING A MEASURED CUP OF BOILING OR CHILLED WATER
To use this feature, you will
need to ensure the correct
settings are saved, according to
the instructions on page 13.
1. Place your cup, mug or bottle
under the water outlet.
2. Touch followed by either
or to start dispensing
your preferred water (Image i).
NOTE for dispensing boiling
water: If you have activated the
child lock feature, you will need
to hold down for 3 seconds.
3. Once your vessel has filled
according to the amount set
in the menu preferences,
the water flow will stop
automatically. To stop the water
flow at any point before, touch
any button on the screen.
i
ii
iii
To Next Page
Loading...