4. Push the key down to release
the latch.
5. Turn the BIBO zapper anti-
clockwise to “open” .
6. Pull the BIBO zapper
upwards and out (Image v).
REPLACING YOUR BIBO ZAPPER
Your BIBO bar will alert you
when your BIBO zapper needs to
be replaced, by first displaying a
countdown to the expiration day
and then with a replace zapper
message (Image i) once the
expiration date has come.
Changing the BIBO zapper is
simple and involves the following:
1. Remove the lid on the top of
your BIBO bar by simply lifting it
off. You will see the tops of two
white filters on the right hand
side of your BIBO bar. The BIBO
zapper is the one towards the
Maintaining your BIBO bar
FILTER AND ZAPPER REPLACEMENT
front of your BIBO bar and can
be recognised by its slimmer
shape and flat top (Image ii).
2. To release the BIBO zapper, you
will need the key supplied with
the delivery and/or installation
of your BIBO bar (Image iii).
Alternatively use anything small
to release the latch as indicated
below.
3. Put the key into the red slot
on the top of the BIBO zapper
(Image iv).
7. Remove your new BIBO
zapper from its packaging
(please handle it with care as it
is delicate) and insert it into the
top of your BIBO bar.
8. Push down so the red tongue
is out and then twist.
9. Turn the new BIBO zapper
clockwise to “close” and install
the new zapper (Image vi).
i
ii
iv
iii
vi
10. Replace the lid of your
BIBO bar.
11. Once the BIBO zapper has
been replaced, touch
on
your BIBO bar’s screen.
12. Navigate to the filter setting
by touching
five times.
If you cannot locate it, do not
worry! You should find a key
in your filter replacement box.
v
To Next Page
Loading...