Function indicating instruction of product and accessories
5
Please read the tips when sidle using the product
1、Count down Timer
2、Continuous pressurize button (Press continuous pressurize button, press
again to stop)
3、Rhythm pressurize button (Press rhythm pressurize button, press
again to stop)
4、Air bleeding indicator light
5、Inhale indicator light
6、Negative ion indicator light
7、Air bleeding timer button (the minimum time setting is 0 second)
8、Inhale timer button (the minimum time setting is 0.1 second)
9、Magic cup DC power supply
10、Suction hole(Connect with long tube)
11、Power (on/ off)
12、Attentions for the use of the instrument
When the operation started, continuous pressurize button and rhythm
pressurize button can be pressed at the same time
If the inhale timer button and exhale time button on the rotate
panel can be adjusted on original set time, rotate of one scale is 0.1
second adjustment, continuous rotation can make continuous time
adjustment.
The minimum scale of inhale timer button can adjust to 0.1 second,
while the minimum scale of exhale timer button can adjust to 0.0
second.
When the exhale timer button adjust to 0.0 second (the minimum
scale), the instrument is in continuous inhale condition.
In the operation process, press continuous negative pressure button
or rhythm negative pressure button can change the original operation,
timer can be working when the button pressed instead of timing once
again.
After the operation, light of continuous negative pressure button or
rhythm negative pressure button will be off, the showing of reciprocal
timer is 30 minutes, the instrument is in ready mode station.
Operation method:
After press the power button for start,
the default value is:
• Whole process: 30 minutes
• Inhale frequency: 2.4 seconds
• Exhale frequency: 0.6 seconds
• Negative ion function initiate
•
•
•
•
•
•
6
①
②
③
④
⑤
⑥
⑦
⑧
Anion
⑨
⑩
11
To Next Page
Loading...
