Need help?Do you have a question about the BIC 940 and is the answer not in the manual?
Detailed steps for removing the turntable and its accessories from packaging and installing it on its base.
Guide to properly mounting, wiring, and adjusting the cartridge in the tonearm head.
Procedure for installing the tonearm counterweight and setting anti-skate force.
Instructions for setting vertical tracking force (stylus pressure) and connecting audio cables and ground wire.
How to connect the power cord to a suitable AC outlet for operation.
Steps to perform manual playback of a single record using the turntable controls.
Instructions for initiating automatic playback of single or multiple records.
How to set the programmer for repeat plays and methods for turning off the unit.
Using the cueing lever and adjusting stylus set-down point and tonearm height.
Procedure for removing the turntable assembly and correctly installing the drive belt.
Guidance on lubrication points and advice on cleaning, handling, and storing records.
Listing of available spare parts and optional accessories for the turntable.
Required cabinet dimensions and technical specifications for the turntable.
Troubleshooting for unit failure to start, inconsistent speed, wow, or flutter.
Diagnosing and resolving no sound, humming, distortion, and tonearm operation issues.
Resolving problems with automatic play like tonearm movement and record dropping.
General| Drive method | Belt drive |
|---|---|
| Speeds | 33 and 45 rpm |
| Effective length | 222mm |
| Overhang | 15mm |
| Cartridge weight range | 4 to 10g |
| Tonearm | tubular aluminium |
To Next Page
