ASSEMBLY AND SET-UP INSTRUCTIONS
A. Set up A-frame and position hitch pins in proper position. Be sure to use
lock washers and tighten bolts securely. Attach flex chain brace to A-
frame then fasten chain end on tailwheel adjustment bracket.
B. Attach PTO shaft according to instructions/diagram attached to the PTO
shaft.
C. Check all bolts including gearbox mounting bolts, blade bolts and blade
carrier bolts.
D. Adjust the tailwheel bracket to level the rotary cutter or obtain desired
cutting position.
E. Lubricate gearbox, tailwheel hub, tailwheel spindle and PTO U-joints.
F. Attach rotary cutter to the tractor.
To Next Page
Loading...