Need help?Do you have a question about the Big Bee SCL 96 and is the answer not in the manual?
General| Brand | Big Bee |
|---|---|
| Model | SCL 96 |
| Category | Farm Equipment |
| Language | English |
Familiarize with decals and inspect area for thrown objects and terrain issues.
Regularly check for loose bolts, ensure snap rings are in place, and use all PTO/tractor guards.
Shut down before leaving, understand PTO force, and allow rotation to stop before servicing.
Recommendation for tractors to be equipped with a roll-bar and seatbelt for operator safety.
Never position yourself under the machine or manually feed it; ensure blades are stopped before reaching under.
Use chain guards in areas with people/animals/property; keep them clear of thrown objects.
Never allow riders and always transport the machine at a safe speed.
Set up A-frame, hitch pins, and attach PTO shaft per instructions.
Verify bolts, check gearbox, and lubricate key components like U-joints.
Adjust tailwheel bracket for cutting position and attach cutter to tractor.
Check gearbox lubricant, lubrication points, bolts, and ensure proper tractor mounting.
Adjust and level the rotary cutter to set the desired cutting height.
Incorrect front-low or rear-low positions cause blade issues, wear, and debris collection.
Ensuring the cutter is level ensures proper cutting and prevents excessive wear.
Check PTO shaft length, engage PTO slowly, and monitor for vibrations or noises during initial run.
Get a feel for the cutter's behavior on open ground, noting centrifugal force effects.
Detailed list of parts and specifications for the SCL-96 PTO shaft assembly.
Provides part identification and key dimensions for the PTO shaft assembly.
Details part identification and key dimensions for a specific PTO shaft assembly variant.
Lists components and specifications for a PTO shaft assembly, including dimensions.
Diagram illustrating the SCD 120 jack assembly.
Diagram illustrating the SCL-96 / SCL-120 hub assembly.
Detailed parts list and specifications for the RW-610-6S accelerator gearbox assembly.
Component list and specifications for the RW-300 accelerator gearbox assembly.
Emphasizes the importance of prioritizing safety in all operations.
Highlights that taking precautions is better than facing consequences.
Urges users to thoroughly read and understand the operator's manual.
Encourages users to think before performing any action related to the machine.
Ensure the tractor and cutter are shut off before performing any maintenance tasks.
Check gearbox oil level and lubricate PTO shaft and tailwheel regularly.
Keep blades sharp, replace in pairs, and ensure all bolts are tightened properly.
Covers 90 days; requires dealer contact for repairs and registration within 10 days.
Disclaimer regarding manufacturer/dealer responsibility for consequential damages or loss of use.
Fields for owner's contact info, seller details, and date of purchase.
Fields for equipment model, name, size, owner's signature, and form date.
To Next Page
