To Next PageTo Next Page
Need help?Do you have a question about the Bigassfans COLD FRONT 300 and is the answer not in the manual?
Instructions for installing casters on the Cold Front 300 model, including component identification and assembly steps.
Guidance on connecting the cooler to a water source using a standard garden hose.
Details on electrical connection requirements, including circuit size and amperage ratings for different models.
Procedure for filling the cooler with water, including the function of the float valve.
Instructions on how to start the fan and set the desired speed.
Steps to start the pump and regulate water flow to the cooling pads for optimal saturation.
Overview of control panel buttons and remote functions for operating the cooler, including fan, pump, and mode settings.
Step-by-step guide on how to remove cooling pads for cleaning or replacement.
Routine maintenance tasks, including pad drying, sump draining, and cleaning cooling media and reservoir.
Instructions for preparing and storing the cooler, ensuring it remains clean and protected.
List of essential tools required for diagnosing and repairing the cooler.
Introduction to the cooler's main systems (pump, water distribution, fan) for troubleshooting.
Explanation of error codes displayed on the Cold Front 500 and their corresponding solutions.
Diagnosing and resolving issues related to the water inlet, float valve, and spray bar assembly.
Identifying and fixing problems with the fan motor, blade, and electrical connections.
Diagnosing pump issues, including failure to run or pump water, and procedures for pump replacement.
General| Model | COLD FRONT 300 |
|---|---|
| Speed Settings | Variable |
| Mounting Type | Portable |
| Fan Type | Evaporative |
| Voltage | 110-120 VAC |
| Material | UV-resistant polyethylene |
| Application | Industrial |
