BIGHORN SRFP96 - Assembly Instructions

Assembly Instructions
6
NOTE: Assemble the fire pit on a non-abrasive surface.
Step 1
Step 2
1
2
Insert one support ring section
(G) into another and attach the
support ring assembly to leg (H) with
(4) M6 x 14 bolts (AA) as illustrated.
Repeat the same procedure to install
the other support ring sections (G).
NOTE: Keep all bolts loose
during the assembly of this step until all
parts are installed into the correct position.
Attach (4) legs (H) to fire bowl (F)
with (12) M6 x 14 bolts (AA).
Hardware Used
AA
M6 x 14 Bolt x 12
Hardware Used
AA
M6 x 14 Bolt x 16
AA
F
H
AA
H
F
G
Lowes.com/Big Horn