Shenzhen BIGTREE technology co., LTD.
BIG TREE TECH
IV. Attention
1. Note that the DSI interface line sequence should not be reversed;
2. Be careful to handle the screen gently to prevent it from being broken;
3. When adjusting the backlight, pay attention to the strength of the rotary encoder to prevent
the encoder from turning bad. Do not continue to turn when the encoder is turned to the end,
otherwise the encoder will be damaged, and our company does not assume after-sales
responsibilities in this case.
If you encounter other problems during use, you are welcome to contact us, and we will
surely answer it for you. if you have any good comments or suggestions on our products, you
are also welcome to give us back, and we will also consider it carefully. Your comments or
suggestions. Thank you for choosing BIGTREETECH products!
To Previous Page
Loading...
Need help?
General
