Need help?Do you have a question about the BIGTREETECH Pad 7 and is the answer not in the manual?
General| Screen Size | 7 inch |
|---|---|
| Touch Type | Capacitive |
| Resolution | 1024x600 |
| Interface | HDMI, USB |
| Operating System | Linux |
| Connectivity | WiFi, Ethernet |
| RAM | 1GB |
| Power Supply | 12V-24V DC |
Download the compatible OS image for CB1 from the specified GitHub release.
Obtain Raspberry Pi Imager or BalenaEtcher for writing the OS image to the microSD card.
Guide to writing the OS image using Raspberry Pi Imager or BalenaEtcher.
Explains the meaning of '#' symbols and comments in configuration files.
Configure network connection by editing the system.cfg file with SSID and password.
Modify settings in system.cfg for Pad7, touch vibration, sound, and auto-brightness.
Replace KlipperScreen with a modified version to enable touch feedback.
Configure overlays for MCP2515 to enable CAN functionality on the Pad 7.
Configure backlight IO for maximum brightness on CM4 by modifying boot files.
Specify HDMI output resolution and enable USB HID for touch functionality.
Add overlays to /boot/config.txt to enable CAN bus functionality.
Troubleshoot CAN bus issues by checking switches, wiring, dmesg, and network interfaces.
Troubleshoot ADXL345 issues by checking CS-Choose switch, SPI wiring, and device names.
To Next Page
