7
Tip radio front downward and push in to seat radio against inner
fairing.
Position radio as shown in photo to allow attached black bezel plate
to clear Harley brackets.
Install (loosely) the 4 Harley Allen-head bolts, adjust radio
position, and tighten bolts.
From the headlight side of fairing:
Insert Radio Into FairingStep 4
Old-style blocks shown
Do not attempt to install from rider side!
If you have dif culty positioning the bolts try placing
one on the short end of an Allen wrench and aligning
them with the holes.
To Next Page
Loading...
