Biketronics BT4180.14 - Step 7: Power Connection; Step 8: Test Amplifier; Troubleshooting

13
• Runsupplyleadwiretothebattery.
Power Connection
Step 7
• Reconnectbattery(positivecablefirst)
• Checkamplifierfunction:
• Powerupradioandturnvolumedownasquickaspossiblesoyoucanstart
atlowvolumeandslowlyworkup.
• Addvolumeandmakesureallspeakershavegoodsound.
• Checktomakesureeverythingisinstalledcorrectly.
• Reinstallfairingandgoriding!
Test Amplifier
Step 8
Itisunsafetolookdownatradiowhileriding.Familiarizeyourselfwithradio
controls in garage. Allow yourself time to normalize working the unit with
handcontrolsand“hearing”theresult.Pleaseexerciseproperridingsafety!
It’salsoworthnotingthatourgearisdesignedtobeloud.Pleaseusecaution
whenturningthevolumeupsoyoudon’tdamageyourhearing.
SAFETY NOTICE
• Ensureproperconnectionshavebeenmade.
• Checkthatradioappearstobeoperationalanddisplayisactive.
• CheckstatusLED:orange=powerapplied,green=ampenabled.
Troubleshooting