Need help?Do you have a question about the BikeYoke REVIVE and is the answer not in the manual?
Crucial warnings about maintenance, disassembly, and safety precautions.
Read instructions carefully, avoid frame modification, and check compatibility.
Ensure correct frame fit and clean seat tube; avoid frame modification.
Properly insert the seatpost covering the minimum insertion line to avoid damage and loss of control.
Tighten the seat collar to a maximum of 5Nm to ensure proper function and avoid over-tightening.
Insert seatpost carefully, avoid pulling housing too hard, and never exceed minimum insertion mark.
Factory setting is 240-250psi, adjustable up to 260psi; wear safety gear and hold post upright.
Perform a hydraulic reset to resolve springiness caused by oil and air mixing during transit.
Troubleshoot stuck levers due to dirty linkage or incorrect air pressure; clean/grease linkage or adjust pressure.
Check seat collar torque and clean clogged foam ring at the bottom of the post for sticky return issues.
General| Type | Seatpost |
|---|---|
| Product color | Black |
| Mounting kit | Yes |
| Quantity per pack | 1 pc(s) |
Weight and Dimensions| Weight | 590 g |
|---|
To Next Page
