8
Installation And Adjustment
1. Install the handlebar
2. Assemble the saddle tube
1.1 Install the handlebar into the folding stem and unfold the folded stem and fasten
the buckle.
Adjust the height of the stem(Note: please be careful not to exceed the limit line.),
and then fasten the clamp.
Install the saddle tube into post receiver. Set right its position and adjust height to
fit your ridding habit. (Note: please be careful not to exceed the limit line) and then
tighten the seat with the clamp.
Open the package of the bike, take out the electric bike and all the accessories inside and
use the tool to cut off the packing rope.
2.1
1.2
To Next Page