Biktrix 500S User Manual

500S Display Manual
Biktrix Version
Display Interface + Button Definition
Normal Operation
Power On/Off
Press and hold the POWER button to turn on the display. With the display turned on
press and hold the POWER button again to turn it off.
Assist Level Operation
Press the UP and DOWN buttons to change the assist levels. The lowest level is 1,
highest level is 9 – the number of levels can be changed in the advanced settings. Level
0 means no motor assistance.
Display Speed and Mileage Mode Switch
Press the POWER button to toggle between different information being shown on the
display. This changes in the following order: AVG SPEED → MAX SPEED→ TRIP→
ODO→ TIME.
*If there is no operation for 5 seconds display will return to Real Time speed
automatically.

Biktrix 500S Specifications

General

Brand	Biktrix
Model	500S
Category	Bicycle Accessories
Language	English

Summary

Display Interface and Button Definitions

Normal Operation

Controls for turning the display on and off using the POWER button.

Assist Level Operation

How to adjust motor assistance levels using UP and DOWN buttons.

Display Mode Switching

Switching display modes like AVG SPEED, MAX SPEED, TRIP, ODO, and TIME.

Headlight and Backlight Control

Turning the headlight and display backlight on and off with the UP button.

Walking Mode

Entering and exiting walking mode for low-speed propulsion.

Data Cleanup

Resetting temporary data including AVG Speed, Max Speed, Trip, and Time.

Parameter Settings

Entering the Parameter Setting Menu

How to access and navigate the parameter setting menu.

System Settings

Changing between Metric or Imperial units for speed and distance.

Brightness Adjustment

Adjusting the display's backlight brightness from 1 (darkest) to 5 (brightest).

Auto Off Configuration

Setting the auto-off time from 1 to 15 minutes or disabling the feature.

Wheel Diameter Setting

Setting the wheel diameter for accurate speed and distance readings.

Password Protection

Entering the password to access and change display settings.

Speed Limit Configuration

Configuring the maximum speed limit for motor assistance.

Hall Setting

Information on the Hall setting, noting it typically does not require changes.

Assist Levels Configuration

Number of PAS Levels

Setting the number of PAS levels the bike will have (0-3, 0-5, or 0-9).

Error Code Definitions

Error Code Meanings

List and explanation of error codes displayed on the 500C display.