What to do if Bilanciai D400 Touch terminals show RAM checksum error?
If your Bilanciai Touch terminals display a RAM checksum error, it indicates an error in the RAM. The suggested solution is to replace the CPU board.
What to do if Bilanciai D400 Touch terminals display program checksum error?
If your Bilanciai Touch terminals show a program checksum error, this indicates an error in the program memory. The suggested solution is to replace the CPU board.
What causes parameters memory error in Bilanciai D400 Touch terminals?
A parameters memory error in Bilanciai Touch terminals is caused by an error in the data contained in the parameters memory of the board. To resolve this, check the linearized calibration parameters.
What to do if Bilanciai Touch terminals show digital cell powering fault?
If your Bilanciai Touch terminals display a digital cell powering fault, replace the load cell that signals the error.
What to do if Bilanciai Touch terminals show converter fault?
If your Bilanciai Touch terminals display a converter fault, it could be due to several reasons. First, check the load cell connection for any faults in the extension lead, junction box, or the load cells themselves. Another cause might be a return signal from the load cell being greater than approximately +23 mV or less than approximately -23 mV; in this case, verify that the load cell is in good working order and within its specified range. A faulty converter board could also be the reason. You can check the converter board using a load cell simulator. If necessary, replace the converter board and/or the CPU. Finally, if digital cells fail to respond, check the cell connections.
What to do if Bilanciai Touch terminals show serial number error on digital cell?
To address a serial number error on a digital cell in Bilanciai Touch terminals, check the serial numbers and calibrate the angles if necessary.
What to do if a cell is broken in a Bilanciai D400 multi-cell system?
If a cell is broken in a multi-cell system of Bilanciai Touch terminals, replace the cell and calibrate the angles.
What to do if the CPU board is broken in Bilanciai Touch terminals?
If the CPU board is broken in your Bilanciai Touch terminals, replace the CPU board and calibrate the angles or reset terminal data if they were saved before the board broke.
What to do if Bilanciai D400 show cell with internal temperature off-limits?
If a Bilanciai Touch terminals display a cell with an internal temperature off-limits, replace the cell that signals the error and calibrate angles for the replaced cell.
What to do if at least one cell is not configured on Bilanciai D400 Touch terminals?
If at least one cell is not configured on your Bilanciai Touch terminals, calibrate the angles.
Details the various connection points for external devices and power supply.
Explains the meaning of symbols and indicators on the terminal's display and keyboard.
Procedure to reset the weighing terminal to its default state.
Step-by-step guide for entering tare values for weighing.
Instructions for printing or transmitting weighing data to a PC.
Explains how to navigate through the terminal's programming menus using specific keys.
Details available setup options, including contrast, date/time, and display settings.
General| Brand | Bilanciai |
|---|---|
| Model | D400 |
| Category | Touch terminals |
| Language | English |
To Next Page
