Step 3.1.1 : When set TTLS, set Tunnel Type to CHAP , MSCHAP ,
MSCHAP-V2 , PAP , or EAP-MD5
Step 3.1.2 : When set PEAP, set Tunnel Type to MD5 , GTC , TLS , or
MSCHAP-V2
Step 3.2 If you do not set PEAP to TLS ,you could use certificate.
Step 4 : After you finish above steps.
You should fill up the following fields( Username , Identity , Password ).
User name : Certificated user name .
Identity : User's identity on the RADIUS server
Password : User's password on the RADIUS server
26
To Next Page
Loading...
