Billion BiPAC 8200N - Quick Start

27
Quick Start
Whether on the Basic or Advanced Conguration Mode, click Quick Start link to WAN Port setup
pages.
Step 1: This screen displays some information for WAN port. Select Connect Mode from the drop-
down menu. There are 2 modes: VDSL and EWAN. Press Continue to go to the next conguration
page.
VDSL Mode
Connect mode: VDSL
Protocol: Shows the current protocol in the device.
EWAN Mode
Connect mode: EWAN
Protocol: Shows the current protocol in the device.
Username: Shows the current username.
IP address: Shows the current value of IP address in the device.