To Next PageTo Next Page
Need help?Do you have a question about the Billy Goat BC2401 and is the answer not in the manual?
General| Brand | Billy Goat |
|---|---|
| Model | BC2401 |
| Category | Brush Cutter |
| Language | English |
Lists technical details for BC2401, BC2401H, BC2401HE models.
Lists critical safety instructions and warnings for operating the machine.
Details sound test conditions and results for the machine.
Reports vibration levels measured under specific operating conditions.
Provides essential safety guidelines to follow during machine operation.
Step-by-step guide for assembling the brush cutter.
Lists the parts that should be included in the product carton.
Lists available literature and documentation for the unit.
Explains how to operate the throttle control for different engine types.
Details all warning and instruction labels applied to the equipment.
Describes labels providing engine operating and maintenance information.
Defines the unit's purpose and general operational safety guidelines.
Instructions for starting the engine using pull or electric start methods.
Guidance on engaging the blade, wheel drive, and general cutting techniques.
Procedure for safely removing debris from the cutting deck.
Explains how to engage and disengage the blade clutch for safe operation.
Explains how to control and vary the ground speed of the self-propelled unit.
Details how to adjust the cutting height for different grass conditions.
Provides guidance on safely lifting and transporting the machine.
Outlines proper procedures for storing the machine, especially long-term.
Guides on engine maintenance and contacting the manufacturer for warranty.
Steps for removing, sharpening, and reinstalling the cutting blade.
Instructions for replacing the transaxle and blade drive belts.
Details on adjusting the tension for the blade drive belt.
Diagram and information on the starter switch wiring configuration.
Procedure for adjusting the clutch/brake for proper engagement and tension.
Lists common problems, their possible causes, and solutions.
Steps for filing a warranty claim for the machine.
