EasyManua.ls Logo

Billy Goat F601S - Page 6

Billy Goat F601S
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
100294 6 F061512A
SAFETY INSTRUCTION CONTINUED
Debris loaders Important
DO NOT use this machine for vacuuming exclusively sand, dust, fine dirt, rocks, glass, string like material,
grain, rags, cans, metal, bark or water.
DO NOT start engine without hose and exhaust elbow connected firmly in place to housing and outlet
DO NOT operate without discharging exhaust into enclosed container.
DO NOT operate with hose or exhaust elbow removed.
DO NOT remove hose until engine has been turned off and has come to a complete stop.
DO NOT transport unit without securing exhaust elbow and making sure that the elbow will not strike
objects.
DO NOT operate this unit freestanding. Unit must be secured in place during any operation
IMPORTANT: With the machine off and spark plug disconnected check the condition of the
replaceable liner before every use and replace if necessary.
INTENDED USE
BLOWER
This machine is designed for cleaning outdoor surfaces, where the debris can be effectively blown into a consolidated area for
convenient pickup and removal.
VACUUM
This machine is designed for vacuuming leaves, grass clippings and other types of organic litter.
Debris mixed with cans, bottles and small amounts of sand can be vacuumed; however, it is not this machine's primary purpose.
Vacuuming cans, bottles and sand will affect the longevity of your machine.
DEBRIS LOADER
This machine is designed for vacuuming leaves, grass clippings and other types of organic litter.
Debris mixed with cans, bottles and small amounts of sand can be vacuumed; however, it is not this machine's primary purpose.
Vacuuming cans, bottles and sand will affect the longevity of your machine.
ALL MACHINES
DO NOT OPERATE IF EXCESSIVE VIBRATION OCCURS! If excessive vibration occurs, shut engine off immediately and
check for damaged or worn impeller, loose impeller bolt, loose impeller key, loose engine or debris stuck in fan or housing. To
remove debris from impeller, see the machine specific trouble shooting section. Note: See parts list for proper impeller bolt torque
specifications.
HANDLING & TRANSPORTING
Always use two or more people to lift these machines. Lift holding the handle and handle brace. Secure in place during transportation.
See specifications for unit weight.
For safety use gloves when lifting.
Never lift any machine while the engine is running.
Blowers
Do not use the front grill as an anchor point when securing the unit for transport.
Never lift the machine while the engine is running
Vacuums
Lift holding the lower handle and the front wheels.
Debris loaders
DO NOT drag the hose when transporting
ALWAYS SECURE THE NOZZLE BEFORE TRANSPORTING UNIT
Not for Reproduction

Related product manuals