Bilt TEETER DEX II User Manual

9
Adjust the Depth of the Leg Supports
Figure 10: The depth of the Leg Supports needs to be
adjusted so that while standing on the Base Frame
platform, your thighs fit comfortably, yet snugly, between
the rollers and the Lap Pad. Ensure there is no room
between the back of your thighs and the Leg Supports.
Figure 12: Slide the Leg Supports in or out depending on
the size of your legs.
Release the Leg Support Adjustment Knob so that it
engages fully into one of the hole settings. Tighten the
Leg Support Adjustment Knob by rotating clockwise.
Figure 11: Loosen the Leg Support Adjustment Knob by
rotating it several turns counterclockwise, then pull down
to disengage the Knob from the hole setting.
Figure 10
Figure 11
Figure 12
WARNING
!
DO NOT use the equipment until it is adjusted properly for your height and leg size.
ALWAYS ensure that your hips are aligned with the top edge of the Lap Pad and that
your thighs fit snugly, yet comfortably, between the supports and the Lap Pad, with
no room between the back of your thighs and the leg supports.
Improper settings could result in serious injury or death!

Bilt TEETER DEX II Specifications

General

Brand	Bilt
Model	TEETER DEX II
Category	Fitness Equipment
Language	English