- Fit the circular end of the extending pipe on
the air outlet (7), and turn it anticlockwise
(“LOCK”) until it locks (you will hear a “click”);
reverse the procedure to remove the pipe.
Extend the flexible pipe as much as necessary
to reach the outside fitting (window or glass
door).
- Fit the flexible pipe duct into the slot in the
external plate so that the 4 pins “A” mate with
their respective slots “B” in the plate, move it
to the left and fix it, and secure it by
tightening the screw on the inside. When
done, check that the parts are rigidly fixed
together.
- Open the window slightly and set the adapter
in the horizontal or vertical position, as
appropriate, and semi-
shutters.
To Next Page
Loading...
