16/20
1) To turn the fan on, press the “ON/OFF ” (1) button on the control panel or the remote control.
2) The fan starts at the lowest speed. On the display of the control panel, an "L" icon will light up, and
other selected functions will display.
3) In order to select the desired speed, press the “SPEED ” (2) repeatedly on the control panel or
the remote control (minimum, medium or maximum).
“L”= minimum speed “M”= medium speed “H”= maximum speed
This function allows you to set the time of operation, after which the unit will stop automatically.
To set the operating time, press the “TIMER ” (5) button on the remote or the control panel
repeatedly: each press of the button changes the time set, and the selected time appears on the display
(0,5 hour - 1 hour – 1,5 hours-2 hours, etc…): the maximum operating time is 7.5 hours. To disable the
timer, set the maximum time, then press the button again and the corresponding indicator lights will
turn off.
:the fan can work both at a constant speed “SPEED ” (minimum, medium and max), as well
as at two different speeds that are intermittent:
“
Sleep
” and “
Natural”.
To activate "Natural" mode, press the “ ” (3) button until “ ” appears on the display: speeds are
random and cyclic. See images with specified time and speed (minimum / medium / maximum) during
each cycle.
To activate “Sleep” mode, press button (3) once more until “ ” appears on the display: this mode
reduces ventilation speed from one speed to the lower speed every half hour. The cycles are:
To Next Page
Loading...
