11/16
switch, and only then remove the plug from the power socket.
Dry both the plug and the power socket carefully before
reactivating the power socket. Reconnect the plug to the
power socket and then use the appliance. If in doubt, call in
qualified staff.
• This appliance must not be operated by means of an external timer or a
separate remote control system, to avoid the risk of fire if the device is
covered and / or is positioned incorrectly. It must also not be used
together with another device that can automatically turn on the unit,
thus avoiding the risk of damage to people, animals or property.
• If the appliance breaks or there is a malfunction, switch off the appliance
and have it checked by qualified personnel; repairs carried out by
unauthorised personnel may be dangerous and nullify the guarantee.
• Ensure that the fan is switched off from the supply mains before
removing the guard.
• The plug of the electric cable, and in particular the metal pins, could contain Lead (CAS Nº
7439-92-1) in quantities exceeding 0.1%: to handle the plug safely (insert and / or remove it
from the socket, etc.) hold its plastic part.
• When the appliance is scrapped, cut the plug from the cable (use protective gloves) and
dispose of the plug and the other parts in accordance with local regulations.
• After removing the packing materials, check the integrity of the appliance; if you are unsure,
do not use it and ask for qualified professional help. The packing materials (plastic bags,
polystyrene, nails, etc.) must be kept out the reach of children because they are potential
sources of danger.
All packaging elements must be disposed of according to their raw material (see the
symbol stamped on each one) and according to the provisions of their municipality. The
bag containing the screws or other parts, which is unmarked due to its small size,
therefore you have to follow the procedures for the disposal of their municipality.
: any stickers or advertising material applied to the grille must be removed before using
the appliance.
• Before connecting the appliance, check that the voltage indicated on the data plate
correspond to those of the electricity network. In the event of incompatibility between the
To Next Page
Loading...
