14/16
8. Attach the fan body to the stand by inserting the lower hole on the adjustable pole
of the stand and lock it by tightening the stand attachment screw (4).
Plug the fan in the power supply.
select the desired speed with the selectors (8):
1 – Minimum speed 2 – Medium speed 3 – Maximum speed
Horizontal oscillation (right-left):
this is selected with the button (2) located on the motor body.
To stop the motion and keep the ventilator still, press the button.
Vertical inclination (high-low):
it is regulated by gripping the motor body and orienting it in the
direction desired; you will hear “clicks” that indicate the fan's various positions.
To turn the fan off, press the “0” key and then remove the plug from the socket.
When not in use for long periods, the plug must always be removed from the socket.
CLEANING AND MAINTENANCE
Attention
: before normal cleaning, remove the plug from the socket.
• Clean the body with soft, slightly damp, cloth; do not use abrasive or corrosive products.
• Do not immerse any part of the fan in water or other liquid: if this should happen, do not put
your hand in the liquid, but first remove the plug from the socket. Carefully dry the appliance
and make sure that all the electrical parts are dry: in the case of doubt, ask for professionally
qualified help.
• It is essential that the motor's air holes be kept from dust and lint.
• If the fan will not be used for long periods, it must be protected from dust and humidity; we
recommend storing it in its original packaging.
• Should you decide not to use the appliance any more, we recommend making it inoperative
by cutting the power cord (after making sure you have disconnected the plug from the
socket) and make dangerous parts harmless if children are allowed to play with them (such
as the blade).
Pursuant to Directive 2012/19/EU on waste electrical and electronic equipment (WEEE),
the crossed bin symbol on the appliance or its packaging indicates that the appliance
must be disposed of separately from other waste at the end of its useful life. The user
must therefore take the appliance to an appropriate recycling centre for electrical and
electronic equipment. Alternatively, instead of handling the disposal, the user can hand
over the appliance to the retailer when a new, equivalent one is purchased. The user can
hand over electronic products measuring less than 25 cm to retailers of electronic
products having a sales area of at least 400 m2 free of charge and with no obligation to
buy. Appropriate separate collection for the subsequent procedure for the
decommissioned appliance for recycling, which includes treatment and environmentally
friendly disposal helps prevent adverse effects on the environment and health and
promotes reusing and/or recycling materials that the appliance consists of.
To Next Page
Loading...
