Bindicator Pulse Point II Series User Manual

3
www.bindicator.com
LVP180914 Rev. D
III. PRODUCT DESCRIPTION
FUNCTION
The LP
®
II Series is an electronic, vibratory level control designed for use in powders and granular solids. A vibrating rod is
used to sense the presence of material.
The rod contains two piezoelectric crystal assemblies. The Piezo crystals convert electrical signals to mechanical
movement, and vice versa.
When material comes in contact with the rod it will cause a reduction in the level of vibration. If the reduction of the
vibration is greater than the set threshold determined by the sensitivity setting the alarm relay will turn ON or OFF
depending on the fail-safe settings.
APPLICATIONS
Unlike radio frequency and capacitance technology sensors, the LP II Series devices sense material using a mechanical
principle and are therefore not aected by the dielectric constant of the material. These are ideal sensors in plastics, dust,
shavings, and low-density powders and food. The rod is more often used in larger size materials such as gravel or pellets.
FEATURES
Universal input power; AC or DC (see specications for input ranges)
No calibration required
Adjustable time delay
Selectable fail-safe operation (high or low level)
Adjustable Sensitivity

Bindicator Pulse Point II Series Specifications

General

Brand	Bindicator
Model	Pulse Point II Series
Category	Accessories
Language	English