13
© ITW FINISHING SYSTEMS AND PRODUCTS
PARTS LIST - 183G - 40 LITRE GALVANIZED STEEL TANK ASSEMLBIES
183G-1010 183G-1013
ITEM PART NO. DESCRIPTION QTY QTY
1 QMS-46 RETAINING NUT ----- 1
2 QMG-85 THRUST WASHER ----- 2
3 ----- THRUST COLLAR ----- 1
4 • ----- SET SCREW (5/16-18 X 3/8) ----- 1
5 QMS-447 THRUST COLLAR KIT (INCL 4 & 5) ----- 1
6 QMG-409 BEARING ASSY-PLAIN STEEL ----- 1
7 SSG-8184-K2 O-RING (KIT OF 2) 1 1
8 ----- SHAFT SEAL 5/8 I.D. ----- 1
9 ----- INTERNAL RETAINING RING ----- 1
10 KK-5042 SHAFT SEAL KIT (INCL 8 & 9) ----- 1
11 QMG-19 PLUG (NON-AGITATED MODELS ONLY) 1 -----
12 TIA-4110-CE SAFETY VALVE ASSY, 110 PSI
1 1
13 QMG-21 AIR MANIFOLD 1 1
14 SS-2707 AIR RELIEF VALVE 1/4 NPT(M) 1 1
15 83-524-K FILL PORT CAP (INCL ITEM 16) 1 1
16 83-1207-K5 FILL PORT CAP GASKET 1 1
17 • ----- STREET ELBOW, 3/8-18 NPT (Brass) 1 1
18 VA-540 BALL VALVE, 3/8 NPS OUTLET 1 1
19 QMG-402-1 TANK LID 1 1
20 QM-1458-1 TANK GASKET 1 1
21 • ----- PLUG, 1/2-14 NPT (PLATED STEEL) 1 1
22 QMG-33 FLUID TUBE 1 -----
23 QMG-29 AGITATOR SHAFT ----- 1
24 ----- AGITATOR PADDLE ----- 2
25 • ----- SOC HEAD CAP SCREW, 5/16-18 X 1-1/4, S.S. ----- 3
26 QMS-444-CE AGITATOR PADDLE KIT (INCL 24 & 25) ----- 2
27 ----- STATIONARY PADDLE ----- 1
28 QMS-445-CE STATIONARY PADDLE KIT (INCL 25 & 27) ----- 1
29 PTL-412-K8 DISPOSABLE TANK LINER, 10-GAL 1 -----
30 QM-1352 THUMB SCREW (SEE ITEM 34) 6 6
31 • SSN-2404-ZN COTTER PIN, 1/8 DIA. X 1" LG. (SEE ITEM 34) 6 6
32 QMG-38-CE CLEVIS PIN (SEE ITEM 34) 6 6
33 QMG-9-CE CLAMP (SEE ITEM 34) 6 6
35 QMG-510-1 TANK & LUG ASSY, 10-GAL 1 -----
36 ----- BOTTOM PLUG 1 1
37 HA-57011 AIR HOSE ASS'Y (INCL W/ ITEM 39) ----- 1
38 85-470 AIR CONTROL—NON AGITATED TANKS 1 -----
38 85-471 AIR CONTROL—WITH AGITATORS ----- 1
39 QS-5012-CE AIR MOTOR/GEARBOX DRIVE ----- 1
40 ¶ CT-453 ADAPTOR 1/4” BSP (M) - 1/4” NPS (F) 2 2
41 ¶ CT-454 ADAPTOR 3/8” BSP (M) - 3/8” NPS (F) 1 1
¶ BSP MODELS ONLY • Purchase locally
To Next Page
Loading...
