Binks 183S-211-CE User Manual

183 RANGE PRESSURE FEED TANKS with and without
AGITATION, 9.5, 40 and 60 Litre capacities
Important: Read and follow all instrucons and SAFETY
PRECAUTIONS before using this equipment. Retain for future
reference.
DESCRIPTION
These Pressure Tanks are CE marked in accordance with the
Pressure Equipment Direcve 97/23/EC and ATEX Direcve
94/9/EC Cat 2 G X for use in Zones 1 and 2. The agitators used
in the agitated models are ATEX cered to Cat 1/2 Gc T4.
They are suitable for use with ammable materials. 183S
models are suitable for use with water based and more
corrosive materials.
These pressure tanks are designed as a pressure container to
supply liquid material at a constant preset pressure up to a
maximum of 7.6 bar (110 psi). The tanks are built to ASME BPV
XIII standards. 183G models are constructed from Galvanised
carbon steel. 183S models are constructed from stainless steel. A
polyethylene liner is included for easy clean up.
Tank Model Capacity Material Type Agitaon
183S-210-CE 9.5 litre Stainless Steel None
183S-211-CE 9.5 litre Stainless Steel Direct Drive
183S-212-CE 9.5 Litre Stainless Steel Manual
183S-213-CE 9.5 Litre Stainless Steel Gear-reduced (Heavy-duty)
183S-1010-CE 40 litre Stainless Steel None
183S-1012-CE 40 litre Stainless Steel Manual
183S-1013-CE 40 litre Stainless Steel Gear-reduced (Heavy-duty)
183G-1010-CE 40 litre Galvanised Steel None
183G-1012-CE 40 litre Galvanised Steel Manual
183G-1013-CE 40 litre Galvanised Steel Gear-reduced (Heavy-duty)
183S-1510-CE 60 litre Stainless Steel None
183S-1512-CE 60 litre Stainless Steel Manual
183S-1513-CE 60 litre Stainless Steel Gear-reduced (Heavy-duty)
Part Sheet
77-2931/2
EN

Binks 183S-211-CE Specifications

General

Model	183S-211-CE
Category	Industrial Equipment
Type	Spray Gun
Fluid Delivery	Pressure Feed
Material	Aluminum
Maximum Air Pressure	100 psi
Air Inlet	1/4 inch NPT