To Next PageTo Next Page
Need help?Do you have a question about the Binks 183S-210-CE and is the answer not in the manual?
Overview of CE marked pressure tanks, their certifications, and suitability for various materials.
Essential safety warnings, cautions, and notes for operating the equipment safely.
Step-by-step instructions on how to safely relieve pressure from the tank before maintenance.
Detailed technical specifications for tank materials, pressure, and available agitation types.
Guidance on installing regulator assemblies and connecting the air supply lines.
Instructions on preparing materials and safely adding them to the pressure tank.
Procedures for pressurizing the tank, connecting to spray guns, and testing operation.
Guidelines for lubricating agitator models and performing regular maintenance tasks.
Key checks to ensure the safety valve and overall equipment integrity through regular inspection.
Common fault conditions, their causes, and recommended corrective actions for equipment issues.
Detailed list of parts for the 183S Range 9.5 Litre Stainless Steel Tank Assemblies.
Detailed list of parts for the 183S Range 40 and 60 Litre Stainless Steel Tank Assemblies.
Detailed list of parts for the 183G Range 40 Litre Galvanized Steel Tank Assemblies.
Exploded view diagram of the 183S Range 9.5 Litre Tank Assembly with part callouts.
Diagram and hook-up illustration for the Direct Drive Agitator.
Diagram and hook-up illustration for the Gear-Reduced Agitator.
Details and parts for the single regulator air control units (85-470, 85-471).
Information and diagram for the bottom outlet conversion kit with legs.
General| Model | 183S-210-CE |
|---|---|
| Category | Industrial Equipment |
| Type | Pressure Feed Spray Gun |
| Material | Aluminum |
| Fluid Delivery | Pressure Feed |
| Fluid Nozzle | 210 |
| Certification | CE |
| Inlet Size | 1/4 inch NPT |
