10
© ITW FINISHING SYSTEMS AND PRODUCTS
PARTS LIST—183S RANGE 9.5 LITRE STAINLESS STEEL TANK ASSEMBLIES
83S-210-CE 83S-211-CE 83S-213-CE
ITEM PART NO. DESCRIPTION QTY QTY QTY
1 QN-97 HANDLE 1 ----- -----
2 QMS-2 PLUG (NON-AGITATED MODELS ONLY) 1 ----- -----
3 SSG-8184-K2 O-RING (KIT OF 2) 1 1 1
4 QMG-21 AIR MANIFOLD 1 1 1
5 SS-2707 AIR RELIEF VALVE 1/4 NPT-M 1 1 1
6 TIA-4110-CE SAFETY VALVE ASSY, 110 PSI 1 1 1
7 • SSP-1939 (S.S.) STR ELBOW (3/8-18) 1 1 1
8 VA-527 BALL VALVE 3/8 NPS OUTLET 1 1 1
9 83-524-K FILL PORT CAP (INCL ITEM 10) 1 1 1
10 83-1207-K5 FILL PORT CAP GASKET (QTY PACK) 1 1 1
11 QMS-416-1 TANK LID 1 1 1
12 20-6858 PLUG (1/2-14) 1 1 1
13 QMS-80-1 TANK GASKET 2 GAL 1 1 1
14 QMS-9-1 FLUID TUBE (DIR DRIVE AGIT) 1 1 -----
15 QMS-53-1 FLUID TUBE (GEAR REDUCED AGIT) ----- ----- 1
16 QMG-43-CE CLAMP (SEE ITEM 20) 4 4 4
17 QMG-46-CE THUMBSCREW (SEE ITEM 20) 4 4 4
18 QMG-40-CE CLEVIS PIN (SEE ITEM 20) 4 4 4
19 SSN-2404-ZN COTTER PIN, 1/8 DIA. X 1" LG. (SEE ITEM 20) 4 4 4
21 PT-78-K10, K60 DISPOSABLE TANK LINER (10 OR 60 EACH) 1 1 1
22 QMS-502-1 TANK & LUG ASSY 1 1 1
23 ----- BOTTOM PLUG 1 1 1
24 QMS-428 AIR MOTOR ASSY ----- 1 -----
25 HAV-500-B AIR ADJUSTING VALVE ----- 1 -----
26 H-2008 NIPPLE 1/4 NPS x 1/4 NPT ----- 1 -----
27 • ----- STREET ELBOW (1/4-18 NPT, BRASS) ----- 1 -----
28 ----- SET SCREW (1/4-20 X 1/4) ----- 2 -----
29 # ----- ADAPTER (SEE ITEM 30) ----- 1 -----
30 KK-4991 SEAL RETAINER KIT (INCL 28, 29, 34,35) ----- 1 -----
31 ----- SHAFT SEAL 1/2 I.D. (DIR. DRIVE AGIT) ----- 1 -----
32 ----- INTERNAL RETAINING RING (DIR. DRIVE AGIT) ----- 1 -----
33 KK-5041 SHAFT SEAL KIT (DIR. DRIVE AGIT) ----- 1 -----
34 • ----- SET SCREW (1/4-20 X 1/4) S.S. ----- 2 -----
35 # ----- SHAFT COUPLING (SEE ITEM 30) ----- 1 -----
36 QMS-73 AGITATOR SHAFT ----- 1 -----
37 • ----- SQ HD SET SCREW, 1/4-20 X 3/8, S.S. ----- 1 -----
38 ----- PROPELLOR ----- 1 -----
39 QMS-448-CE AGITATOR PROPELLER KIT (DIR. DRIVE) ----- 1 -----
40 QMS-46 RETAINING NUT ----- ----- 1
41 KK-5049 THRUST WASHER (KIT OF 2/EA) ----- ----- 1
42 ----- THRUST COLLAR ----- ----- 1
43 • ----- SET SCREW, 5/16-18 X 3/8 ----- ----- 1
44 QMS-447 THRUST COLLAR KIT (INCL. 42 and 43) ----- ----- 1
45 QMS-407 BEARING ASSY. ----- ----- 1
46 ----- SHAFT SEAL 5/8 I.D. (GEAR REDUCED AGIT) ----- ----- 1
47 ----- INTERNAL RETAINING RING (GEAR REDUCED AGIT) ----- ----- 1
48 KK-5042 SHAFT SEAL KIT (GEAR REDUCED AGIT) ----- ----- 1
49 QMS-5 AGITATOR SHAFT ----- ----- 1
50 ----- AGITATOR PADDLE ----- ----- 1
51 ----- SOC HD CAP SCREW, 5/16-18 X 1-1/4, S.S. ----- ----- 1
52 QMS-449-CE AGITATOR PADDLE KIT (INCL 51 AND 52) ----- ----- 1
53 QS-5012-CE AIR MOTOR/GEARBOX DRIVE ----- ----- 1
54 HA-57011 AIR HOSE ASSY ----- ----- 1
55 SSP-30-ZN SWIVEL ELBOW ----- ----- 1
56 85-470 AIR CONTROL (NON-AGITATOR TANKS) 1 ----- -----
57 85-471 AIR CONTROL (AGITATOR TANKS) ----- 1 1
58 ¶ CT-453 ADAPTOR 1/4” BSP (M) - 1/4” NPS (F) 2 2 2
59 ¶ CT-454 ADAPTOR 3/8” BSP (M) - 3/8” NPS (F) 1 1 1
¶ BSP MODELS ONLY • Purchase locally
To Next Page
Loading...
