Binks 183S-210-CE - Gear-Reduced Agitator Assembly

9
© ITW FINISHING SYSTEMS AND PRODUCTS
GEAR-REDUCED AGITATOR
Note
Use PTFE based thread sealant on all
air and uid connecons
Refer to SBBI-E-19-095 for informaon about
maintenance of the agitator assembly. Agitator
ref is QMS-431-CE, Drive motor QS-5012-CE
PG
PETROLEUM
JELLY/GREASE
PG
PG
GEAR-REDUCED DRIVE AGITATOR-REGULATOR
HOOK-UP
Note
Open side of sha seal (46) faces
downward.
Retainer (47) required only for
vacuum operaon.
For regulator parts see page 13