Binks 183S-210-CE - Specifications and Agitation Options

4
© ITW FINISHING SYSTEMS AND PRODUCTS
SPECIFICATIONS
183G GALVANIZED TANKS 183S STAINLESS STEEL TANKS
Maximum Working Pressure 110 psi
Tank Shell SA-414 Steel, Galvanized (Zinc) 304 Stainless Steel
Tank Lid SA-414 Steel, Galvanized (Zinc) 304 Stainless Steel
Fluid Tube 3/8 in. Steel Pipe, Galvanized 3/8 in. SS Pipe, 316 Stainless Steel
Fluid Outlet (Elbow) Steel, Zinc Plate 316 Stainless Steel
Fluid Valve, Outlet
Brass, Nickel Plate
3/8-18 NPS(M)
316 Stainless Steel
3/8-18 NPS(M)
Agitator Paddle/Propeller Conducve Nylon, Glass Filled
Agitator Sha 303 Stainless Steel
Agitator Sha Seal Engineered PTFE, Stainless Steel
Air Manifold Steel, Zinc Plate
Plug (Air Manifold Coupling) Steel, Zinc Plate 18-8 Stainless Steel
Boom Outlet (Oponal Kit) 304 Stainless Steel 3/4-14 NPS(M)
AGITATION OPTIONS
Type Applicaon
No Agitaon
Materials that require minimal or no mixing and/or readily hold any solids
in suspension.
Direct Drive Agitaon
Low to medium viscosity materials that require mixing and/or solids
suspension.
Gear-reduced Drive Agitaon
Heavy-duty agitator for medium to high viscosity materials that require
mixing and/or solids suspension.