EasyManua.ls Logo

Binks DX200 - Page 3

Binks DX200
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
PRESSURE RELIEF PROCEDURE.
Always follow the pressure relief
procedure in the equipment instruction
manual.
WARNING
CAUTION
NOTE
Hazards or unsafe practices which could result in
severe personal injury, death or substantial
property damage.
Hazards or unsafe practices which could result in
minor personal injury, product or property
damage
PROJECTILE HAZARD. You may be
injured by venting liquids or gased that
are released under pressure, or flying
debris.
Read the following warnings before using this equipment.
AUTOMATIC EQUIPMENT. Automatic
equipment may start suddenly without
warning.
OPERATOR TRAINING. All personnel
must be trained before operating
finishing equipment.
KNOW WHERE AND HOW TO SHUT
OFF THE EQUIPMENT IN CASE OF AN
EMERGENCY.
IT IS THE RESPONSIBILITY OF THE EMPLOYER TO PROVIDE THIS INFORMATION TO THE
OPERATOR OF THE EQUIPMENT.
Important installation, operation or maintenance
information.
WARNING
In this part sheet, the words WARNING, CAUTION and NOTE are used to emphasize important safety information as
follows:
PACEMAKER WARNING. You are in the
presence of magnetic fields which may
interfere with the operation of certain
pacemakers.
KEEP EQUIPMENT GUARDS IN PLACE.
Do not operate the equipment if the
safety devices have been removed.
NEVER MODIFY THE EQUIPMENT. Do
not modify the equipment unless the
manufacturer provides written
approval.
PINCH POINT HAZARD. Moving parts
can crush and cut. Pinch points are
any areas where ther are moving
parts.
77-3208-R1.6 3/16

Related product manuals