EasyManua.ls Logo

Binks MX432 - User Manual

Binks MX432
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
77-2915R-1
page 1 of 16
We reserve the right to change the specifications without prior notice.
© Binks 2012
MX432
32:1 Pump Systems for
Air Assist & Airless Finishing
Patent Pending
SPECIFICATIONS
Ratio: 32:1
Maximum air inlet pressure: 8 bar [116 psi]
Maximum fluid pressure: 256 bar [3712 psi]
Displacement per cycle: 24 cc [0.8 oz]
Output @ 60 cycles/min: 1.4 L /m [0.4 gal/m]
Air consumption @ 20 cycles/min: 147 L PM [5.2 SCFM] @20 LPM
Maximimum recommended
continuous cycle rate:
20 cycles/min
Air inlet connection: 3/8" BSP(m) and 1/4" NPS(m)
Air piston diameter: 85 mm [3.3 in]
Stroke length: 75 mm [3.0 in]
Fluid inlet connection: 1/2" NPS(m)
Fluid outlet connection: 3/8" BSP(m) / 3/8" NPS(m)
Wetted parts materials of
construction:
Stainless Steel, Tungsten Carbide,
Hard Chrome, PTFE, Polyethylene,
Leather
Sound level: 96.2 dB

Other manuals for Binks MX432

Question and Answer IconNeed help?

Do you have a question about the Binks MX432 and is the answer not in the manual?

Summary

Product Specifications

Safety Precautions and Warnings

General Safety Guidelines

Key safety instructions for operating the equipment safely and preventing hazards.

Preventing Static Sparking

Guidelines for preventing static electricity buildup and discharge during operation.

Operational Safety Warnings

Crucial warnings regarding unattended sprayers, hose inspection, and pressure relief.

Pump Operation and Maintenance

Grounding the Pump

Procedure to properly ground the pump to prevent static electricity hazards.

Startup Preparation and Rinsing

Steps for preparing the pump for initial use and rinsing procedures.

Pump Startup and Shutdown

Instructions for safely starting and shutting down the pump system.

Cleaning the Pump

Detailed steps for cleaning the pump after use, depending on the material sprayed.

System Assemblies and Components

Cart Mounted Assemblies

List of components for the MX432 cart mounted pump system.

Wall Mounted Assemblies

List of components for the MX432 wall mounted pump system.

Tripod Mounted Assemblies

List of components for the MX432 tripod mounted pump system.

High Pressure Filter Assemblies

Specifications and parts list for high pressure filter assemblies.

Air Assist Air Control Assembly

Components and parts for the air assist air control assembly.

Airless Gun Air Control Assembly

Components and parts for the airless gun air control assembly.

System Accessories

Overview of optional accessories like tripod and suction hose assemblies.

Compliance and Warranty Information

EC Declaration of Conformity

Declaration of conformity with relevant EU directives for machinery and explosive atmospheres.

Product Warranty and Service

Details of the product's limited warranty and European sales/service contact information.

Summary

Product Specifications

Safety Precautions and Warnings

General Safety Guidelines

Key safety instructions for operating the equipment safely and preventing hazards.

Preventing Static Sparking

Guidelines for preventing static electricity buildup and discharge during operation.

Operational Safety Warnings

Crucial warnings regarding unattended sprayers, hose inspection, and pressure relief.

Pump Operation and Maintenance

Grounding the Pump

Procedure to properly ground the pump to prevent static electricity hazards.

Startup Preparation and Rinsing

Steps for preparing the pump for initial use and rinsing procedures.

Pump Startup and Shutdown

Instructions for safely starting and shutting down the pump system.

Cleaning the Pump

Detailed steps for cleaning the pump after use, depending on the material sprayed.

System Assemblies and Components

Cart Mounted Assemblies

List of components for the MX432 cart mounted pump system.

Wall Mounted Assemblies

List of components for the MX432 wall mounted pump system.

Tripod Mounted Assemblies

List of components for the MX432 tripod mounted pump system.

High Pressure Filter Assemblies

Specifications and parts list for high pressure filter assemblies.

Air Assist Air Control Assembly

Components and parts for the air assist air control assembly.

Airless Gun Air Control Assembly

Components and parts for the airless gun air control assembly.

System Accessories

Overview of optional accessories like tripod and suction hose assemblies.

Compliance and Warranty Information

EC Declaration of Conformity

Declaration of conformity with relevant EU directives for machinery and explosive atmospheres.

Product Warranty and Service

Details of the product's limited warranty and European sales/service contact information.

Binks MX432 Specifications

General IconGeneral
BrandBinks
ModelMX432
CategoryWater Pump
LanguageEnglish

Related product manuals