Need help?Do you have a question about the Binks E2-7 and is the answer not in the manual?
General| Brand | Binks |
|---|---|
| Model | E2-7 |
| Category | Water Pump |
| Language | English |
Mechanical solution for preventing pump and paint system overpressure.
Connect to outlet manifold port to stop pump on overpressure.
For hazardous areas, must be wired for clockwise rotation; PTC sensors included.
Details required inverter settings for motor speed and acceleration/deceleration.
Ensure connections, interlocks, material availability, and outlet are correct before operation.
System adjusts flow rate to maintain set pressure based on fluid demand.
Working life affected by fluid abrasiveness, duty cycle, and pressure requirements.
Details daily, weekly, 3-monthly, 6-monthly, annual, and 5-year inspection and operation tasks.
Verifies seals/gaskets, factory-filled oil, and replacement procedures for leaks.
Covers Ex motor maintenance per EN 60079-17 and repair procedures per IEC 79-19.
Procedure for connecting, running, and lubricating the pump after significant maintenance.
Steps for safely draining fluid, including using solvent for final cleaning.
To Next Page
