Binks E2-7 - EU Declaration of Conformity

EN
Notified body details and role: Element Materials Technology (0891)
Lodging of Technical file
Product Description / Object of Declaration:
Electric Pump E2, E4, EV2
This Product is designed for use with: Solvent and Water based materials
The object of the declaration described above is in conformity with the relevant Union
harmonisation legislation:
Machinery Directive 2006/42/EC
ATEX Directive 2014/34/EU
EMC Directive 2014/30/EU
by complying with the following statutory documents and harmonized standards:
EN ISO 12100:2010 Safety of Machinery - General Principles for Design
EN 12621:+A1:2010 Machinery for the supply and circulation of coating materials under pressure - Safety
requirements
EN 1127-1:2011 Explosive atmospheres - Explosion prevention - Basic concepts
EN 13463-1:2009 Non electrical equipment for use in potentially explosive atmospheres - Basic methods and
requirements
EN 13463-5:2011 Non electrical equipment for use in potentially explosive atmospheres - Protection by
constructional safety "c"
EN 13463-8:2003 Non-electrical equipment for potentially explosive atmospheres. Protection by liquid immersion
'k'
EN 60079-0:+A11:2013 Explosive atmospheres - Equipment. General requirements
EN 60079-1:2014 Explosive atmospheres - Equipment protection by flameproof enclosures "d"
EN 60079-7:2015 Explosive atmospheres. Equipment protection by increased safety "e"
EN 60034-1: 2010 Rotating electrical machines
Providing all conditions of safe use / installation stated within the product manuals have been
complied with and also installed in accordance with any applicable local codes of practice.
This Declaration of conformity / incorporation
is issued under the sole responsibility of the
manufacturer:
Carlisle Fluid Technologies UK Ltd,
Ringwood Road,
Bournemouth, BH11 9LH. UK
EU Declaration of Conformity

Signed for and on behalf of Carlisle Fluid
Technologies UK Ltd:
D Smith Director of Sales (EMEA)
29/6/18
Bournemouth,BH11 9LH,UK
Suitable for use in hazardous area: Zone 1
Protection Level: II 2 G X IIB T4 (Pump)
II 2 G Exd/Exde IIB T4 IP55 (Motor) CE0722
II 2 GD ck T4 (Gearbox)
77-3245 R1.0 2/36 www.carlisleft.com