EN
Check for any excessive mechanical noise
Weekly
Inspection Operation
Daily Check for any fluid leakage
Check for excessive fluid pressure pulsation
Check oil level within gearbox
3 Monthly
While running, apply (502375) grease to cam follower bearings, 8 strokes of a
standard ‘cartridge’ grease gun (502373).
Inspect Cam and Cam followers for excessive wear, replace if excessive wear can
be seen.
Every 5 Years
Replace main shaft bearings. Linear Guide Bearings, Guide Rails and Cams if
excessive wear can be seen.
Use only 502375 (KP2N-20 DIN 51825) Grease for Cam Follower Bearing.
Maintenance
Maintenance schedule
6 Monthly
Grease Main Shaft Bearing with 502375 grease.
Inspect Linear Bearings, Rod, Cam and Cam followers for excessive wear, replace
if excessive wear can be felt or seen.
Annually
Inspect Piston and Replace Piston Seals / Bellows / Springs.
Inspect Piston & Outlet Ball Checks, replace as necessary.
Inspect Linear Guide Bearing and Guide Rails for excessive wear.
77-3245 R1.0 26/36 www.carlisleft.com
To Next Page
Loading...
