Binks E2-7 - PARTS LIST - Shaft & Bellows Assembly E2-7 (194872)

EN
Using Item No. 136, push
bellows over spigot until located
in groove.
PART NUMBER DESCRIPTION QTY REMARKS
BELLOWS SPACER
130
132
Remove bellows assembly
spigot.
Smear loctite 572 over nose of
bellows, thread nut onto bellows
ensuring the thread starts
squarely. Grip bellows lightly by
hand and tighten the nut with a
1" A/F spanner until the nut
contacts the bellows shoulder.
Screw Item No. 135 (assembly
spigot) onto the piston shaft
(grease spigot with AMGD-010).
PARTS LIST
E2-7 (194872)
133
134
Shaft & Bellows Assembly
1


PISTON SHAFT
SHAFT SEAL
1135 502377 BELLOWS ASSEMBLY SPIGOT
136 502382 BELLOWS POSITIONING TOOL 1 TOOL
192374
192579
194873
192628
194874
1
1
1
1
131
TOOL
ITEM
KNIFED BELLOWS
RETAINING NUT
-
KEY
(Reverse for assembly)
LOCTITE
TORQUE
MAINTENANCE ORDER
GREASE INTERNAL
(AGMD-010)
GREASE
77-3245 R1.0 23/36 www.carlisleft.com